4 Ways To Fix Your Vacuum Cleaners That’s Lost Suction

After a period of use, your  top 10 vacuum cleaners will encounter some problems that reduce performance. One of the most common problems is a decrease or complete loss of suction. This causes your vacuum to be unable to remove dust or stop working. Today's article will show you 4 causes and 4 ways to fix them so you can save your vacuum cleaner.

4 reasons why vacuum cleaners lose suction power

Finding the causes and fixing them is the fastest and most effective way to get your vacuum cleaner working again. Here are the 4 main reasons of your vacuum loss of suction power:

• The brush is tangled

• The filter is sealed

• The trash bin is overloaded

• The vacuum hose is clogged

4 ways to regain strong and stable suction

One or more causes can cause loss of suction power. Please apply 1 or more of the following 4 ways to fix it!

Clean the floor head and brush

Remove the nozzle and check. If the tip does not have a brush roll, check the airline and the tool’s edge. Remove hair, hair, debris that clogs the airways. For nozzles with brushes, they are often tangled with bristles, hair, and dirt that prevents the meeting from spinning. Use scissors and carefully remove all of them.

Clean the filter

Today's Best Rated Vacuum Cleaners  have two types of filters: an air membrane to filter the air out of the trash can and a HEPA filter to remove allergens. You should regularly clean these 2 types of filters at least once a month. Depending on the model, there will be 1 of 2 types of filters:

• The filter is washable: remove it according to the instructions and wash it in warm soapy water. Then let it dry for at least 24 hours before reattaching the unit.

• Replacement filters: these are not washable. You must replace it with a new filter.

Clean trash cans

Usually, the vacuum cleaner will reduce suction when the bag or garbage container is full. Your job is to remove the trash and clean it properly.

• For bagless vacuum cleaners: Please note the maximum level that the trash can hold, usually only 1/3 of the bin. When the garbage reaches this level, throw it away.

• For vacuum cleaners with bags: ideally, you should replace them with a new trash bag. This will help the machine have strong and stable suction.

Cleaning the suction pipe (hose)

Hair, large debris, or bottle caps can clog the hose or wand of the vacuum cleaner. Use a long stick to remove the obstruction from the pipe. It is recommended that you clean the tube by soaking in warm soapy water and rinsing it with clean water.

 Best Vacuum Cleaners In The World: Discover the World's Highest Rated Vacuums are in creasingly improving the suction power of their models to increase cleaning efficiency. But it will not avoid the problem of reducing suction after many uses. Hopefully, the above 4 fixes will help you successfully regain strong and stable suction for the vacuum cleaner.